Filter
Top Products
GREASING AND SERVICE TABLE 53
*5($6,1*$1'6(59,&(7$%/(
Important maintenance work to be carried out by an authorized KTM workshop.
K10N K50A K100A J1A J2A
Engine
Change engine oil and oil filter, clean oil screens.b
x ( P. 118)
•••••
Check and adjust valve clearance.b
x
••
Check engine mounting screws for tightness. • • • • •
Replace spark plug. •
Check engine bolts accessible from outside for tightness. • • • • •
Fuel injection
Check connection boots for cracks and leakage.b
x
•••
Read out the error memory with a KTM diagnostic tool.b
x
•••••
Check fuel hoses, SLS hoses and vent hoses for damage, correct fit-
ting and leaks.b
x
•••••
Clean, check and grease the O-ring of the fuel hose connection.b
x
••••
Check the cable harness of the throttle valve body for damage and cor-
rect positioning.b
x
•••
Attachments Check the cooling system for leakage. • • • • •
Check the antifreeze and coolant level. ( P. 106) • • • • •
Check the functioning of the radiator fan.b
x
•••••
Check the exhaust system for leaks and correct fitting and check that
the exhaust clamps are tight.b
x
•••••
Check Bowden cables for damage, smooth operation, routing without
sharp bends and setting.
•••••
Check/correct the fluid level of the hydraulic clutch. ( P. 114) • • • •
Check air filter and change if necessary. Clean the air filter box.b
x
••••
Check cables for damage and routing without sharp bends.b
x
•••••
Check the headlamp setting. ( P. 104) • • • • •