Filter
Top Products
GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION 39
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
ದ Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
ದ Before your first trip, read the entire operating instructions carefully.
ದ Get to know the operating elements.
ದ adjust the basic position of clutch lever. ( P. 113)
ದ adjust the basic position of handbrake lever. ( P. 71)
ದ Adjust the basic position of the footbrake lever.
ದ Get used to handling the vehicle on a car park before making a longer trip. Try also to ride as slowly as possible and in a standing posi-
tion to get a better feeling for the vehicle.
ದ Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
ದ Do not make any changes to the vehicle, and use only KTM approved parts.
Info
Parts from other manufacturers can reduce the operational safety of the vehicle.
ದ Run the engine in.
Running in the engine
ದ During the running-in phase, do not exceed the specified engine speed and engine performance.
Specification
Maximum engine speed
During the first: 1,000bkm (621.4bmi) 6,000brpm
After the first: 1,000bkm (621.4bmi) 7,800brpm