Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 82
ದ Position the spacing sleevesb
. Mount and tighten screwsb.
Specification
Screw, front brake caliper M10x1.25 45bNm
(33.2blbfbft)
Loctite
®
243™
100168-10
ದ Operate the hand brake lever several times until the brake pads are lying correctly on
the brake disc.
ದ Take the front from the work stand. ( P. 56)
ದ Pull the front wheel brake and push down hard on the fork several times to align the
fork legs.
ದ Fully tighten screwb
.
Specification
Screw, fork stub M8 15bNm (11.1blbfbft)
ದ Taking rear from work stand. ( P. 57)
Removing rear wheelbx
ದ Jack up the rear of the motorcycle. ( P. 57)
100144-10
ದ Remove nutb. Remove chain adjusterb. Holding the rear wheel, withdraw the wheel
spindleb
.
ದ Push the rear wheel forwards as far as possible and take the chain off the rear sprocket.