MAINTENANCE WORK ON CHASSIS AND ENGINE 117
Adjusting the handlebar anglebx
100196-10
ದ Loosen screwb.
ದ Move the handlebar to the desired position and slightly tichten the screws.
ದ Move the handlebar carefully in both directions as far as it will go.
» If the handlebar instruments touch the fuel tank:
ದ Correct the handlebar angle.
Info
The distance between the handlebar support and the handlebar clamp
must be the same at the front and rear.
ದ Fully tighten screwb
.
Specification
Screw, handlebar clamp M8 20bNm (14.8blbfbft)
Checking engine oil level
Info
The engine oil level must be checked when the engine is at operating temperature.
ದ Stand the motorcycle upright on a horizontal surface.