STORAGE 136
ದ Cover the motorcycle with a porous sheet or blanket.
Info
Do not use non-porous materials since they prevent humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm up properly, the water vapor produced during
combustion condenses and causes valves and exhaust system to rust.
Putting into operation after storage
ದ Take the front from the work stand. ( P. 56)
ದ Taking rear from work stand. ( P. 57)
ದ
Recharge the battery.b
x ( P. 93)
ದ
Install the battery.b
x ( P. 93)
ದ Set the clock. ( P. 28)
ದ Fill up with fuel. ( P. 51)
ದ Carry out checks before putting into operation. ( P. 42)
ದ Make a test ride.