KTM 690 Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 112
100189-10
Remove the radiator capb and the bleeder screwb.
Tilt the vehicle slightly to the right.
100190-10
Pour coolant in until it overflows free of bubbles, and then replace the bleeder screw
immediately.
Alternative 1
Coolant ( P. 152)
Alternative 2
Coolant (mixed ready to use) ( P. 152)
Fill the radiator completely with coolant. Refit the radiator cap.
Place the vehicle on the side stand. Point the fuel tank forwards.
Danger
Danger of poisoningExhaust gases are poisonous and can result in
unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in a closed space.
Start the engine and run it until the 5th bar of the temperature indicator lights up.