Kenwood TH-D72A/E GPS Receiver User Manual


 
3 PREPARATIONS FOR OPERATING APRS
16 CONTENTS TH-D72A/E
Set the receiver shut-off period for the battery saver.
The operating frequency will depend on what region of the world you are operating. You can begin
operation using the frequency configured for the data band as follows:
North America: 144.390 MHz
Europe: 144.800 MHz
Australia: 145.175 MHz
New Zealand: 144.575 MHz
Argentina: 144.930 MHz
Brazil: 145.570 MHz
Japan: 144.640 MHz (9600 bps), 144.660 MHz (1200 bps)
Press the [TNC] key to place the transceiver in APRS mode so as to operate APRS.
Select the [BCON] key to transmit the beacon using the method selected in the above-mentioned
Step 10.
Step 13: Battery Saver
Step 14: Frequency
Step 15: Setting to APRS mode
Step 16: Transmitting beacons