Kenwood DNX9990HD GPS Receiver User Manual


  Open as PDF
of 62
 
100100 101
Return to the Top page
Remote Controller Operation
Return to the Top page
Remote Controller Operation
Remote Controller
Thisunitcanbeoperatedusingtheremotecontroller.
2CAUTION
•Put the remote controller in a place where it will not move during braking or other operations. A
dangerous situation could result, if the remote controller falls down and gets wedged under the
pedals while driving.
•Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat
generation may result.
•Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause
the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately
rinse with water and consult a physician.
•Place the battery out of reach of children. In the unlikely event that a child swallows the battery,
immediately consult a physician.
Battery Installation
Iftheremotecontrolleroperatesonlyovershorterdistancesordoesnotoperateatall,itis
possiblethatthebatteriesaredepleted.
Insuchinstances,replacethebothbatterieswithnewones.
1
Insert two “AAA”/“R03”-size batteries with the and poles aligned properly,
following the illustration inside the case.
Switching the operation mode
Thefunctionsoperatedfromtheremote
controllerdifferdependingontheposition
ofthemodeswitch.
DVD
T V
NAV
AUD
•
•
•
•
AUD mode
Switch to this mode when controlling a
selected source or tuner source, etc.
DVD mode
Switch to this mode when playing a disc
media including DVD, VCD, and CD.
NAV mode
Switch to this mode when controlling
navigation function.
NOTE
•When controlling a player that is not integrated in
the unit, select “AUD” mode.
Direct search mode
Usingtheremotecontroller,youcanjump
directlytothedesiredfile,trackchapter,etc.
withenteringthenumbercorrespondingto
thecontent.
NOTE
•This operation cannot be performed for USB
device and iPod.
1
Press the <#BS> button several times
until the desired content appears.
The available content are different
depending on the source.
DVD
Title number/Chapter number/Play time/Item
number*
* You may not be able to use this function with
some discs or scenes.
VCD 1.X and 2.X (PBC OFF)
Track number
VCD 2.X (PBC ON)
Scene number/number
Music CD
Track number/Play time
Audio files
Folder number/File number
Radio
Frequency value
HD Radio tuner
Frequency value/Channel number
SIRIUS XM
Channel number
2
Enter the number of the content
you want to play using the numeric
keypad.
3
For DVD or VCD, press the <ENTER>
button.
For music CD or audio files, press the
<POSITION> button.
For radio, press the <2> or <3>
button.
The content you entered is played.
Functions Of The Remote Controller Buttons
 previous next