Kenwood DNX9990HD GPS Receiver User Manual


  Open as PDF
of 62
 
6464 65
Return to the Top page
Bluetooth Operation
Return to the Top page
Bluetooth Operation
Connecting the Bluetooth unit
1
Touch [SET] of [Paired Device List].
Connection Device List screen appears.
2
Touch the device name you want to
connect.
Means that the device is a cell-phone.
Means that the device is an audio player or
cell-phone with audio player.
Means that the device is a Pandora internet
radio.
Means that the device is Aha-ready.
NOTE
•If the icon is lighted, it means that the unit will
use that device.
3
Touch [TEL(HFP)], [Audio(A2DP)],
[Pandora(SPP)], or [aha(SPP)].
[TEL(HFP)] is for cell-phone.
[Audio(A2DP)] is for audio player.
[Pandora(SPP)] or [aha(SPP)] is for
Bluetooth device.
NOTE
•Touching [Remove] removes registration
information. After you touch the key, a
confirmation message appears. Follow the
message and complete the operation.
•To disconnect the device, perform above
procedures again.
•A cell-phone cannot be connected by touching
[TEL(HFP)] when the receiving source is Pandora
internet radio, Aha or Bluetooth Audio.
Registering special Bluetooth
unit
Ifregisteringcannotbecompletedbynormal
operation,thereisanothermethod.
1
Touch [SP DEV] in the Searched
Device List screen.
Special Device List screen appears.
2
Select the device name you want to
register from the list.
Special Device Select Confirm screen
appears.
3
Confirm the device name and touch
[Yes].
NOTE
•If you touch [No], operation is cancelled.
•The devices not listed cannot be registered.
Playing Bluetooth Audio Device
Bluetooth basic operation
2 23 3
5
Simple Control screen List Control screen
1
4
1 Information display
Displays the name of the track information. If the information is not available, device name is displayed.
2 Multi function key
Touch to switch the multi function menu.
3 Multi function menu
The functions of each key are as follows.
•[4] [¢]: Searches the previous/next content.*
•[3]: Plays.*
•[8]: Pauses.*
•[
AUDIO]: Touch to display the Audio Control screen. See Controlling Audio (P.90).
•[
SETUP]: Touch to display the SETUP Menu screen. See Setting Up (P.78).
•[
EXT SW]: Control the external device power supply. For details, see External Device Control
(P.88).
•[7]: Stops playback.
•[ REAR
]: Touch to mute the rear speaker.
4 Control switching area
Touch to switch between the Simple Control and List Control screen.
5 File information
Displays the information of the current file.
*TheseitemsappearonlywhentheaudioplayerwhichsupportsAVRCPprofileisconnected.
NOTE
•If the operation keys do not appear, operate from the player.
•Depending on your cell-phone or audio player, audio may be heard and controlled but text information may not
appear.
•If the volume is too low, raise it on your cell-phone or audio player.
 previous next