Filter
Top Products
4646 47
Return to the Top page
HD Radio, SIRIUS XM
Return to the Top page
HD Radio, SIRIUS XM
HD Radio tuner Basic Operation
Mostfunctionscanbecontrolledfromthesourcecontrolscreen.
NOTE
•Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode (P.101).
2
1
3
3
4
4
5
8
6
2
7
7
Simple Control screen List Control screen
1 PS/Station name display
Displays the PS name or station name.
2 Information display/Control switching area
Displays the following information.
•Picture: The picture data or station Logo data is displayed if available from current content.
•[FM1] etc.: Band display
•MHz/kHz: Frequency display
•Preset #: Preset number
•HD#: Channel display
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.47).
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see Multi function menu (P.47).
5 Sub function key
Touch to display “Sub function menu” (7 in this table).
HD Radio™ tuner and SIRIUS XM Radio Operation
6 Preset list
Displays the list of preset stations or channels and the information.
7 Sub function menu
The following functions can be performed by using keys in this area.
•Switches the band: Touch [AM] or [FM].
•Tunes in a station: Touch [1] [¡]. The method of frequency switching can be changed. See Multi
function menu (P.47).
•Selects a channel: Touch [CH∞] or [CH5].
•Tunes in by entering direct number:
Touch [
] and enter the desired number. For details, see Direct search (P.53).
8 List switching key
Touch to switch between the preset list and the information list.
In HD Radio tuner mode, tuned program information will be displayed.
Multi function menu
Thefunctionsofeachkeyareasfollows.
[P1] - [P6]
Selects the preset station. Touch for 2 seconds to store the current station into the preset memory.
[
]
Displays the list of preset stations or channels.
[TI]
Sets the traffic information mode on. For details, see Traffic Information (P.54).
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
•AUTO1: Tunes in a station with good reception automatically.
•AUTO2: Tunes in stations in memory one after another.
•MANUAL: Switches to the next frequency manually.
[AME]
Selects the auto memory mode. For details, see Auto memory (P.52).
[PTY]
Searches a program by setting program type. For details, see Search by program type (P.53).
[RCV]
Switches the receive mode in the following sequence; [AUTO], [DIGITAL], [ANALOG]. For details, see
Receive Mode (P.55).
[
SETUP]
Touch to display the SETUP Menu screen. See Setting Up (P.78).
[
AUDIO]
Touch to display the Audio Control screen. See Controlling Audio (P.90).
[
EXT SW]
Touch to control the external device power supply. For details, see External Device Control (P.88).
[ REAR
]
Touch to mute the rear speaker.
Continued