Kenwood DNX9990HD GPS Receiver User Manual


  Open as PDF
of 62
 
8686 87
Return to the Top page
Setting Up
Return to the Top page
Setting Up
Camera Setup
Youcansetcameraparameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
Rear Camera*
1
Selects the type of rear camera to use.
CMOS-310: When the CMOS-310/CMOS-300
series with ID 1 set is connected.
Other (Default): When the other camera is
connected.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse or
pressing the <AUD> button for 1 second.
OFF (Default): Switches to the rear view
camera video display when
pressing the <AUD> button for
1 second.
R-CAM Settings*
2
Adjusts the CMOS-310/CMOS-300 series with
ID 1 set. For details, see the instruction manual
of your camera.
Front Camera*
1
Turn this setting on when the CMOS-310/
CMOS-300 series with ID 2 set is connected.
Setting values are ON and OFF. Default is “OFF”.
F-CAM Settings*
3
Adjusts the CMOS-310/CMOS-300 series with
ID 2 set. For details, see the instruction manual
of your camera.
*1Thesesettingsbecomesettableonlywhen
theparkingbrakeison.
*2Thissettingbecomessettableonlywhen
theparkingbrakeisonandtheCMOS-
310/CMOS-300seriesisselected.
*3Thissettingbecomessettableonly
whentheparkingbrakeisonand“Front
Camera”issetto[ON].
Software Information
Checkthesoftwareversionofthisunit.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Software].
Software Information screen appears.
4
Confirm the software version. Touch
[Update] as necessary.
NOTE
•For how to update the software, see the relevant
update procedure manual which comes with the
software.
AV Input Setup
YoucansetAVinputparameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
4
Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5
Set each item as follows.
iPod AV Interface Use*
1
Sets the terminal which iPod is connected.
Setting values are iPod and AV-IN2. Default is
“iPod”.
AV-IN1 Name / AV-IN2 Name*
2
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is “VIDEO”.
*1ThisitemcanbesetwheninSTANDBY
sourceandalsotheiPodisdisconnected.
*2[AV-IN2Name]becomessettablewhen
“AV-IN2”isselectedin[iPodAVInterface
Use].
 previous next