Kenwood DNX9990HD GPS Receiver User Manual


 
4242 43
Return to the Top page
CD, Disc, iPod, USB device
Return to the Top page
CD, Disc, iPod, USB device
USB/iPod/DivX Setup
YoucanperformsetupwhenusingUSB/
iPod/DivX.
NOTE
•Each operation in this section can be started from
the Top Menu screen. For details, see Operating
With The Top Menu Screen (P.11).
1
Touch [ ] in the control screen.
Multi function menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [USB], [iPod] or [DivX] in the list.
Each setup screen appears.
See the following section for each setting.
• USB setup (P.43)
• iPod setup (P.44)
• DivX setup (P.44)
USB setup
1
Set each item as follows.
Picture Display Time
Selects length of time to display JPEG picture
file in the screen. Select from [Short], [Middle],
and [Long] (default).
On Screen USB
Sets how to display the information of the USB
device.
Auto (Default): Information appears for 5
seconds when updated.
OFF: Does not display any information.
Voice memo
1
Touch [ ] in the control screen.
Status bar
Confirms the current location.
[Start]
Starts recording the voice memo.
[Stop]
Stops recording the voice memo.
[Send]
Sends the recorded voice memo.
[Cancel]
Cancels the voice memo and returns to the
control screen.
NOTE
•This function is available from an iPhone (iOS 5
or later) connected via the KCA-iP202 (optional
accessory).
•This function is not available from an Android
device connected via Bluetooth.
Navigate
Setsthelocationinformationreceivedfrom
Ahaatthedestinationofnavigation.
1
Touch [ ] in the control screen.
[Save]
Saves the location information.
[Go!]
Sets the location information at the destination
and starts navigation.