Kenwood DNN9710BT GPS Receiver User Manual


 
27
Return to the Top page
Basic Operations
ö To return to the full navigation
screen:
Touch [ ].
NOTE
• For details on control keys, refer to the instructions
in each section.
Trip log function
You can upload the routes you traveled and
the songs you listened to the Route Collector
site so that you can confirm them later.
Precaution
• Trip log function can be used to log information
such as routes you have traveled and songs you
have listened to. Such information is uploaded
to our Route Collector site, for later access by
you through your computer. Non-personal data
from this log is also kept and used by us for
statistical purposes to improve the quality of our
products. By selecting to use this function, you
are accepting use of the data for such statistical
purposes.
This is an optional function that can be activated
at your sole option and responsibility the
procedures set forth in the left column.
Press the <MENU> button in
the navigation screen or source
control screen.
Touch [
Triplog On].
Touch [Yes].
When the Trip log is active, ” ” appears
in the status bar.
NOTE
• You must have a connection with the internet.
• You can use the Trip log function when you have
logged in the system as Owner or User.
Where To function
You can set the destination of the navigation
easily by setting the destination of the
Route Collector site from your PC or your
smartphone.
Log in to Route Collector site by
the owner account.
http://www.route-collector.com/
Set the destination in the Route
Collector site.
You will be notified by “
” icon
on the status bar.
Drag the status bar downward.
Touch [
].
It will be set as the destination of the
navigation.
Touch [GO] to start the route
guide.
NOTE
• You can set a user account when you have logged
in the Owner.
• You must have a connection with the internet.
• For the operation of the Route Collector site refer
to the instruction in its website.
1
2
3
1
2
3
4
5