Kenwood DNN9710BT GPS Receiver User Manual


 
157
Return to the Top page
Troubleshooting
Ñ
SiriusXM
Error Message Cause Solution
Check Tuner A SiriusXM tuner is not connected
to this navigation system.
Check the connection to the SiriusXM tuner.
Subscription
Updated - Press
Return To
Continue
The SiriusXM subscription has been
renewed.
Touch [ 6 ] to clear the error message.
Channel Not
Available
The currently selected channel is
unavailable.
Ch
Unsubscribed
The currently selected channel is
not subscribed to.
Check Antenna No antenna is connected to the
SiriusXM tuner.
Check that an antenna is connected to the
SiriusXM tuner.
No Signal No SiriusXM radio signal is received.
Resetting the Unit
If the unit or the connected device fails to operate properly, reset the unit.
1
Press the <Reset> button.
The unit returns to factory settings.
HOME 6
NOTE
• Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device
connected can damage the data stored in the USB device. For how to disconnect the USB device, see How to
Play Media (P.18).
• When the unit is turned on after resetting, the Initial SETUP screen appears. See Initial setup (P.14).