Kenwood DNN9710BT GPS Receiver User Manual


  Open as PDF
of 178
 
14
Return to the Top page
Basic Operations
Initial setup
Perform this setup when you use this unit for the first time or when you reset the unit. See
Resetting the Unit (P.157).
Set each item as follows.
Language Setup
Select the language used for the GUI and input methods. Default is “English (United States)”.
1Touch [Language Setup].
2Select a language from the list.
WiFi Setup
Configure settings for connection to Wi-Fi.
1Touch [WiFi Setup].
2Slide Wi-Fi to ON.
3Select the Wi-Fi access point to register from the list.
4Enter the Password.
5Touch [Connect].
6After setting, press the < 6 > button.
For details on operation, see Wi-Fi Setup (P.32).
Mobile Network settings (DNN991HD)
Set the direct Internet connection with 4G/3G Dongle.
1Touch [Mobile Network settings].
2Touch [Mobile Network configuration].
3Enter the network information.
4Touch [Save].
5Touch [Mobile Network].
6After setting, press the < 6 > button.
For details on operation, see 4G/ 3G Dongle Setup (P.35).
1
 previous next