Infinity GPS-MIC-1 GPS Receiver User Manual


 
4
Current Product Rev 3.0 Features:
2” diagonal LCD display, 120 x 160, monochrome screen, backlit
Supports most brands of two way radio with optional available interface cables
Built-in GPS with AMTEL chip supporting 14 simultaneous parallel GPS channels
WAAS/EGNOS enabled unit with built-in antenna
Built in electronic compass
Transceiver transmits users coordinates
Tracks activity/location for a group of 5 or more people
Tracks up to 50,000 waypoints
Built in 512 MB solid state memory
Group ID communications built-into the microphone for selective communications
Built-in graphics for scenic waypoints
Send and receive text messages
Functions as a G Mouse and is PC supported for navigation
Upgradeable firmware
PC software package allows for parameter setting of the unit, GIS reading, collection
of log data.
Supports export to various formats: Google Earth ™, KMZ, GPX and up to 40 other
types of navigation/mapping software
2.0 Other Notes:
a) The GPS-MIC-1 comes with a rechargeable lithium ion battery, USB cable and Belt
Clip.
b) When connected to a USB port, the USB charges the unit’s battery.
c) When the GPS MIC-1 is connected to both a PC and a radio transceiver using the
selected radio interface cable, this unit becomes the interface for the receiving head
end. A field unit may always be used as a head end unit located at dispatch or
incident command if connected to a PC or Laptop using the application software.
d) Before using the equipment, charge the battery for atleast 10 hours.