12
2.
Time Format
a.
24 hour
b.
12 hour
3.
Date Format
a.
dd/mm/yy
b. mm/dd/yy
c. yy/mm/dd
c. Set the Position Format (ddd.ddddd) Default
i.
Select between:
1.
ddd.ddddd
2.
dddmm.mmm
3.
dddmmss.s
d.
Set the Map Datum (WGS84 Default)
i.
Many other options are available.
e.
Set the Position Format
i.
Metric
ii.
Statute
f.
Set the Elevation Format
i.
Meter
ii.
Feet
g.
Set the Temperature Format
i.
Celsius
ii.
Fahrenheit
h.
Set the Power Management Settings
i. Backlight Time Out Timer (time that the unit’s backlight turns off)
1.
Adjusted in seconds
ii. Power Saving Method (turns off screen)
1. Adjusted in minutes
i. Set the SOS TX Time
i. Depending on your version, automatic transmit time is from 1 second
to 99 minutes and 45 seconds
ii. With the unit outside, the system will acquire satellite data.
j. Turn GMOUSE to ON
6. STARTING THE SYSTEM
a. Exit the building and when outside, access the System Settings Setup Menu,
highlight SYSTEM, GPS SET and:
i. Ensure that GPS POWER is set to on.
ii. Perform a GPS cold start to initialize the GPS receiver under GPS