Filter
Top Products
Secure the GPS-MIC-1 cable to the handheld GPS unit using the two set
screws provided with the cable. The connection to the GPS-MIC-1 must be
flush and level.
To use: First power up your two way transceiver. Then power up your
GPS-MIC-1 unit.
Make sure that the battery pack has been charged.
You may connect the USB cable used to charge the battery to the base of
the GPS-MIC-1 unit without removing the radio’s connecting cable. See
picture below:
Allow the unit to see the satellites before using the GPS location transmit
feature built into the GPS-MIC-1.
Consult the following pages as to how to maneuver through the various User
Features.
Pictured below: Use of the Infinity GPS-MIC-1 unit connected to an Infinity
P-1000 series portable two way transceiver.
14