Husqvarna CR 250 Motorcycle User Manual


 
20
DATI TECNICI
MOTORE
Tipo..........................monocilindrico a 2 tempi
Raffreddamento ................................a liquido
Alesaggio
(WR-CR 250)....................................mm 66,4
(WR-360).............................................mm 78
Corsa
(WR-CR 250).......................................mm 72
(WR 360) .............................................mm 73
Cilindrata
(WR-CR 250)..................................cm
3
249,3
(WR 360)........................................cm
3
348,8
Rapporto di compressione (a luci chiuse)
(WR-CR 250)..........................................8,4:1
(WR 360) ................................................7,3:1
Avviamento ..................................... a pedale
DISTRIBUZIONE
Tipo............valvola lamellare in aspirazione e
valvola H.T.S. a comando meccanico
sullo scarico
TECHNICAL DATA
ENGINE
Type...........................2-stroke single cylinder
Cooling..............................................by liquid
Bore
(WR-CR 250)..................................... 2.61 in.
(WR-360) ............................................3.07 in.
Stroke
(WR-CR 250)..................................... 2.83 in.
(WR 360) ............................................2.87 in.
Capacity
(WR-CR 250) .............................. 15.21 cu.in.
(WR 360)......................................21.28 cu.in.
Compression ratio (with closed ports)
(WR-CR 250) .........................................8,4:1
(WR 360)................................................7,3:1
Starting ........................................kick starter
VALVE GEAR
Type.........................lamellar valve on suction
H.T.S. valve with mechanical control
on the exhaust
DONNEES TECHNIQUES
MOTEUR
Type..............................un cylindre à 2 temps
Refroidissement.............................par liquide
Alésage
(WR-CR 250) .................................. mm 66,4
(WR-360)....................................................78
Course
(WR-CR 250)...................................... mm 72
(WR 360) .............................................mm 73
Cylindrée
(WR-CR 250)................................. cm
3
249,3
(WR 360)........................................cm
3
348,8
Rapport volumetrique (avec orifices fermés)
(WR-CR 250)..........................................8,4:1
(WR 360) ................................................7,3:1
Démarrage........................................a pédale
DISTRIBUTION
Type ............soupape lamellaire en aspiration
soupape H.T.S. à commande mécanique
sur l'échappement
IMP. 1-250/360-2002 11-12-2001 10:48 Pagina 20