Filter
Top Products
SSyysstteemm SSttaattuuss
(Start-Up Options Menu)
Use System Status to view system connections and to conduct a unit self-test.
After you select System Status from the Start-Up Options Menu, press the
VIEW key to display the following information views:
• Self Test:displays results from the internal diagnostic self test, including
unit serial number, Printed Circuit Board (PCB) serial number, software
revision, total hours of operation, and the input voltage.
• Accessory Test: lists the accessories connected to the system.
• GPS Diagnostic View: shows a sky chart and numerical data from the
GPS receiver. The sky chart shows the location of each visible GPS
satellite with its satellite number and a signal strength bar.
The current GPS Fix Type is reported as No Fix, 2D Fix, 3D Fix, or Enhanced. An
Enhanced fix has been augmented using information from WAAS, EGNOS, or MSAS.
A 3D or Enhanced Fix is required for navigation.
Satellite
Being Used
Current Latitude
and Longitude
Sky Chart
Satellite Being
Monitored
GPS Diagnostic View
GPS Fix Type
NOTE: A GPS Fix is required to identify your location and load weather data.
Use this view to confirm GPS Fix Type. For an XM Diagnostic View, see XM
Weather Submenu: XM Info.
31
The Menu System