Filter
Top Products
1-3
Power Lumbar Control
Use the lumbar control,
located on the outboard
side of the seat, to increase
or decrease lumbar support
in an area of the lower
seatback.
To increase support, press and hold the front of the
control. To decrease support, press and hold the rear
of the control. Let go of the control when the lower
seatback reaches the desired level of support.
You can also reshape the side wing area of the lower
seatback for more lateral support.
To increase support, press and hold the top of the
control. To decrease support, press and hold the bottom
of the control. Let go of the control when the lower
seatback reaches the desired level of support.
Memory Seat
The controls for the
memory function are
located on the driver’s
door trim panel.
These buttons are used to program and recall the
memory settings for the driver’s seat and both the
driver’s and the passenger’s outside mirrors and the
radio station presets. The seat, mirror positions and
radio station presets can be personalized for both
driver 1 and driver 2. Driver 1 or driver 2 corresponds
to the memory buttons labeled 1 and 2 on the driver’s
door and the numbers, 1 or 2, embossed on the back
of each keyless entry transmitter.