Filter
Top Products
5-24
4. Assemble the jack and tools as follows:
Front Flat Tire: Attach the jack handle (E) with
the hook end connected to the u
-hook/clevis on the
jack (A). Slide the ratchet (F) onto the jack handle (E)
with the UP mark facing you.
Rear Flat Tire: Attach the jack handle extension (D)
to the jack handle (E) and then press the clip (arrow)
so it engages. Then attach the jack handle (E) with
the hook end connected to the u
-hook/clevis on the
jack (A). Slide the ratchet (F) onto the jack handle
extension (D) with the UP mark facing you.
5. Turn the ratchet (F) clockwise to raise the jack head
to the lifting point.
Front Flat Tire: Position
the jack under the vehicle
on the frame behind the
flat tire where the frame
sections overlap. See the
graphic following for an
approximate measurement
of the jack location on
the frame.
Front Position
X = 28.5 inches (72.0 cm)