Filter
Top Products
6-37
Taillamps
A. Stoplamp
B. Turn Signal Lamp
C. Back
-Up Lamp
1. Open the liftgate.
2. Remove the two screws
from the rear lamp
assembly and remove
the rear lamp assembly.
3. Turn the bulb socket counterclockwise to remove it
from the taillamp housing.
4. Pull the bulb straight out
from the socket.
5. Press a new bulb into the socket, insert it into
the taillamp housing and turn the socket clockwise
until it is locked in place.
6. Reinstall the rear lamp assembly and tighten
the screws.