Hummer H2 Automobile User Manual


 
2-51
When the DRL are on, only your DRL lamps will be on.
The taillamps, sidemarker and other lamps won’t be on.
The instrument panel won’t be lit up either.
When it begins to get dark, the automatic headlamp
system will switch from DRL to the headlamps.
As with any vehicle, you should turn on the regular
headlamp system when you need it.
Off-Road Lamps (If Equipped)
The off-road lamps button is located on the overhead
console.
To use the lamps, the engine must be running with the
transmission in a drive gear.
Remove the covers from the lamps and press the button
to turn the off road lamps on. Press the button again to
turn them off. An indicator light will glow near the
button when the lamps are on.
The off
-road lamps will be cancelled when the ignition
is turned off. If you still want to use the lamps after you
restart the vehicle, you will need to press the off-road
lamp button again.
Interior Lamps
Instrument Panel Brightness Control
The thumbwheel for this feature is located next to the
exterior lamps control.
(Instrument Panel Lights): Turn the thumbwheel,
located next to the exterior lamps control, up or down to
brighten or dim the instrument panel lights and the radio
display. This will only work if the headlamps or parking
lamps are on.
To turn on the dome lamps, with the vehicle doors
closed, turn the thumbwheel all the way up.
Exit Lighting
With exit lighting, the interior lamps will come on when
you remove the key from the ignition. The lamps will
not come on if the dome override button is pressed in.
See “Dome Lamps” later in this section for more
information on dome override.