Filter
Top Products
22 Selecting a Destination
NavMate Navigation System
• City Name – If you know the city and street address, select this option. You
could use the “Street Name” option instead, but it is quicker and easier if
you use the “City Name” option when you know both parts of the address.
• Street Name – If you know the street address but you are not sure of the city,
select this option. You might use this option, for example, if you were in a
large metropolitan area and a street continues through multiple cities and
you are not sure of what city is appropriate for the street address number that
you know.
Press to confirm your selection.
Depending on the option you selected, either the Select City screen or Select
Street screen is displayed. When first displayed, they are shown in “List Mode.”
To switch to “Spell Mode,” press the button. Refer to “List Mode vs. Spell
Mode” on page 16 for more details on using the different modes.
Screen 5. Select City Screens
Screen 6. Select Street Screens
If you selected the “City Name” option, continue by following the prompts
on the display screen to select a city first, then street, then address number or
intersection. If you selected the “Street Name” option, follow the prompts to
select a street name, then a city, then a street address. Be sure to press after
each selection.
Eventually the Select Route Criteria screen is displayed. Refer to “Selecting
Route Criteria” on page 31 for more details.
ENTER
SPELL
List Mode
Spell Mode
List Mode
Spell Mode
ENTER