Filter
Top Products
3200 User’s Guide 10 - 1
10
Product Specifications
3200 Linear Imager Product Specifications
Parameter Specification
Dimensions (Typical):
Height
3.8 inches (9.52 cm)
Length
6 inches (15.3 cm)
Width
2.7 inches (6.8 cm)
Weight
5.1 ounces (145 g)
Light Source 626 nm ± 30mn visible red LED
Scan Rate 270 scans per second in most usages
Skew Angle ±55 degrees
Pitch Angle ±55 degrees
Scan Contrast 20% minimum
Voltage Requirements 5VDC ±5% at imager
Current Draw (Max): Scanning
Standby
3200 @ 4.75 - 5.25Vdc 245mA 90mA
Temperature Ranges:
Operating
32° F to +122° F (0° C to +50° C)
Storage
-4° F to +140° F (-20° C to +60° C)
Humidity 0 to 95% non-condensing at 122° F (50° C)
Mechanical Drop
Operational after 25 drops from 4 feet
(1.2 m) to concrete
Vibration Withstands 5G peak from 22 to 300 Hz
ESD Sensitivity 8 kV Air discharge
Sealant Rating IP41
Product Agency Compliance
International: IEC60825-1 Eye Safety (Class 1 LED)
Japan: VCCI
Taiwan: BSMI
South Korea: MIC
Australia/NZ: C-Tick marked.
Europe:
CE 2004/108/EC EMC directive (Class B EMI)
USA: FCC (Class B)
Canada: ICES-003 (Class B)