Filter
Top Products
3200 User’s Guide 8 - 1
8
Utilities
To Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the
decoded symbology. (See the Symbology Chart, included in the , page A-1) for
the single character code that identifies each symbology.) This action first clears
all current prefixes, then programs a Code I.D. prefix for all symbologies. This is
a temporary setting that will be removed when the unit is power cycled.
Show Software Revision
Scan the barcode below to output the current software revision, unit serial
number, and other product information.
Show Data Format
Scan the barcode below to show current data format settings.
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your imager, or you’ve
changed some options and want the standard product default settings restored,
scan the
Standard Product Default Settings
barcode below.
The Menu Commands starting on page 9-1 lists the standard product default
settings for each of the commands (indicated by an asterisk (*) on the
programming pages).
Add Code I.D. Prefix to
All Symbologies (Temporary)
Show Revision
Data Format Settings
Standard Product Default Settings