Filter
Top Products
3200 User’s Guide 3 - 1
3
Output
Good Read Indicators
Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning
this option off, only turns off the beeper response to a good read indication. All
error and menu beeps are still audible.
Default = On.
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the imager
emits on a good read.
Default = Medium.
Trigger Modes
Manual/Serial Trigger
Trigger
The following barcodes will allow you to use the reader in Manual Trigger mode
(need to press the trigger to read) or Automatic Trigger mode (the beam is
always on).
* On
Off
Low (1600 Hz)
* Medium (2550 Hz)
High (4200 Hz)
* Manual/Serial Trigger