Filter
Top Products
3200 User’s Guide 1 - 1
1
Getting Started
About This Manual
This User’s Guide provides installation and programming instructions for the
3200 linear imager. Product specifications, dimensions, warranty, and customer
support information are also included.
Honeywell barcode imagers are factory programmed for the most common
terminal and communications settings. If you need to change these settings,
programming is accomplished by scanning the barcodes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking the Imager
After you open the shipping carton containing the 3200 linear imager, take the
following steps:
• Check to make sure everything you ordered is present.
• Save the shipping container for later storage or shipping.
• Check for damage during shipment. Report damage immediately to the
carrier who delivered the carton.
3200 Linear Imager Models
Note: The Honeywell 3200 linear imager may be used with two interfaces,
which are described in this User’s Guide. Refer to the chart below to
determine the models that can be used with your interface.
The chart below lists the 3200 linear imager models. “04” designates ivory and
“14” designates black
.
Models Primary Interfaces
3200-04USBE (ivory)
3200-14USBE (black)
USB
3200-04KBWE (ivory)
3200-14KBWE (black)
Keyboard wedge