Filter
Top Products
3200 User’s Guide 6 - 7
Code 39 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created from the chart, Code
Page Mapping of Printed barcodes on page A-4, and scan the value and the
SAVE barcode from the Programming Chart inside the back cover of this
manual. The data characters should then appear properly.
Interleaved 2 of 5
< Default All Interleaved 2 of 5 Settings >
Interleaved 2 of 5
Check Digit
No Check Digit indicates that the imager reads and transmits barcode data with
or without a check digit.
Code 39 Code Page
* On
Off