Filter
Top Products
50
3 = Delete All Programs
To delete All automation programs, from the Set Up Program menu, press the 3 (DELETE) key. The display will prompt you to
confirm the deletion.
DELETE ALL PROGRAMS?
0=NO 1=YES
Select 1 (YES) to delete all automation control programs in the system. Select 0 (NO) or press the ' * ' key to return to the Set Up
Program menu.
NOTE: IF YOU CHOOSE THIS OPTION, ALL OF YOUR PROGRAMS WILL BE LOST PERMANENTLY.
Edit Programs
The Edit Program menu is used to create an automation program.
EDIT PROGRAM
1=WHEN 2=CMD 3=&COND
• Selecting 1 (WHEN) is used to specify the time that the program is activated or the macro button (event) that activates
the program.
• Selecting 2 (CMD) allows you to specify the action to be taken when the program is executed.
• Selecting 3 (&COND) allows a condition to be specified that must be true for the program to be executed at the
specified time.
Each of these items defaults to its current setting for an existing program that is being edited, or to a default value for a new
program.
For each program, it is only necessary to specify the time or event and the action to be taken. It is not necessary to specify a
condition on the program if the action should be taken whenever the specified time or event occurs.
Edit Programs When
Selecting the 1 (WHEN) key, from the Edit Program menu, allows the time or button/event that activates the program to be
changed. The display shows:
EDIT WHEN
1=TIMED 2=BUTTON
Times Programs
Selecting 1 (TIMED) sets the program to be activated at a specific time of day. You are prompted to enter the time and date or
days of week. The current default value is shown for each item. Press ' # ' to accept the default.
12:00 AM 5/17
1=TIME 2=DATE/DAY
Select 1 (TIME) to enter the new time. If the desired time is the time in which sunrise or sunset will occur, press the up arrow key
for sunrise, or the down arrow key for sunset before entering a time.
TIME: 12:00 AM
HHMM
↑=RISE/AM ↓=SET/PM