Filter
Top Products
68
Transferring MapSource Points of Interest
(POI) Data
If you have purchased a Garmin MapSource CD-ROM
mapping program and optional PC interface cable, you
may want to transfer data before beginning use, to provide
your unit with maximum Find features. The Rino 110
can accept up to 1 MB of data from MapSource Points of
Interest CD loaded on a PC and connected to the Rino
Data Port. It is not possible to transfer 3rd party maps
into Garmin products.
Data transfer requires the use of a PC, a Garmin
MapSource CD-ROM, and the accessory PC Interface
Cable with RS-232 serial port connector. Follow detailed
instructions for data transfer in the MapSource User’s
Manual.
To setup for data transfer:
1. Remove the Power/Data Port cover on the back of
the unit by lifting up on the protective cover on the
back of the unit.
2. Connect the serial port connection on the cable to
the PC serial port.
3. Connect the remaining cable connector to the back
of the Rino by orienting the slot on the connector
with indexing bar on the back of the unit. Then,
slide the connector in place. Be sure that the cable is
pushed all the way into the back of the unit!
4. Turn on the Rino and follow instructions for map
data transfer provided in the MapSource User’s
Manual. See also page 53 for unit interface settings.
MapSource is also an excellent
medium for storage and safety
backup of Personal Waypoints,
Routes and Saved Tracks.
See your Garmin Dealer or
visit the Garmin web site at:
www.garmin.com for
informa
tion.
MapSource
Setup
Appendix D