Filter
Top Products
15
Send Location - Overview
Another feature is the ability to send a specifi c loca-
tion to other Rino users. This can come in handy if you
are trying to round-up the group, or just want to meet at
a specifi c location. You may send any point found from
the Find ‘N Go menu. If the unit needs to wait until 30
seconds have elapsed since the last position transmission,
a “Waiting to send location...” message will appear until
the unit is able to transmit. If a location is sent more than
once, a number will automatically be added to the end of
the name (CAMP, CAMP 1, CAMP 2, etc.).
To send a location:
1. Press the THUMB STICK IN and hold it until the
Shortcuts Menu is displayed.
2. Highlight “‘Find ‘N’ Go’” and press the THUMB
STICK IN.
3. Highlight the desired category and press the
THUMB STICK IN. ( For the Contacts List, select the
desired contact and press the THUMB STICK IN.)
4. Depending on which category you select, highlight
the desired item and press IN on the THUMB
STICK to display the Information page for that item.
5. From the Information Page, highlight the Options
Menu in the upper right and press IN on the
THUMB STICK.
6. Highlight ‘Send Location’ and press IN again. The
unit will now send the point to the other Rino users
on your channel/code.
Position Reporting
Send Location
To send a location, high-
light the Options Menu
from the Waypoint Review
Page and press IN.
Choose ‘Send Location’
and press IN.