Filter
Top Products
Specifications
Apollo GX50/60/65 Installation Manual
33
SECTION 3 - SPECIFICATIONS
This section includes detailed electrical, physical, environmental, and performance
specifications for the Apollo GX50 and GX60/65.
ELECTRICAL
Input voltage............................................. 10VDC to 40VDC, reverse polarity protected
Input current (GPS navigation input) ....... 500 mA typical, 750 mA max. at 13.75 VDC
250 mA typical, 375 mA max. at 27.5 VDC
Input current (comm input) ...................... 270 mA typical, 2A max. at 13.75 VDC, receive
130 mA typical, 900 mA max. at 27.5 VDC, receive
2.1 A typical, 3.2 A max. at 13.75 VDC, transmit
1.0 A typical, 1.4 A max. at 27.5 VDC, transmit
Note: Receive max. at full receive audio, transmit
max. at 90% modulation at 1000 Hz
Input power (GPS navigation input)......... 7 watts typical
Input power (comm input)........................ 3.7 watts typical, receive
28 watts typical, transmit
Internal fuses ............................................ Nav input: 3 amp fast blow, surface mount on-board
Comm input : 7 amp fast blow, soldered in-board
Fuses must be replaced with the same or equivalent
type (contact the factory).
Memory backup........................................ Internal lithium battery with a service life of
approximately 4 to 6 years. See Appendix B for
battery replacement instructions.
Note: The GX50/60/65 will provide a message on the display when the Lithium battery is
running low and needs replacement.
PHYSICAL
Height ....................................................... 2.00 inches (5.08 cm)
Width........................................................ 6.25 inches (15.88 cm)
Depth ........................................................ 11.45 inches (29.1 cm) behind panel, including
mounting frame and connectors
Weight (with mounting frame)................. GX50: 2.6 lb. (1.179 kg)
GX60/65: 3.1 lb. (1.409 kg)