Garmin GX50 GPS Receiver User Manual


 
Introduction
6 Apollo GX50/60/65 Installation Manual
REGULATORY COMPLIANCE
The Apollo GX60/65 is designed and tested to meet the following TSO/JTSOs:
FAA TSO-C37d/JTSO-2C37e Class 4 for transmit
FAA TSO-C38d/JTSO-C38e Class D for receive
FAA TSO-C128/JTSO-2C128 for unintentional transmission (stuck mic)
FAA TSO-C129a /JTSO C129a (GX60 – Class A1, GX65 – Class A2) for GPS
navigation
The Apollo GX50 is designed and tested to meet the following TSO/JTSOs:
FAA TSO-C129a/JTSO-C129a Class A1 for GPS navigation
The Apollo GX60/65 comm complies with the FCC requirements specified in:
CFR 47, Part 87, Aviation Services, Subpart D, Technical Requirements
The Apollo GX50 and GX60/65 comply with the FCC requirements specified in:
CFR 47, Part 15, Radio Frequency Devices, Subpart B, Unintentional Radiators
The Apollo GX50/60/65 software is designed and tested to RTCA/DO-178B, level C and ED-
12B Level C.
Note: Unauthorized changes or modifications to the GX50/60/65 may void the
compliance to regulatory agency requirements and authorization for continued
equipment usage.
UNPACKING THE EQUIPMENT
Carefully unpack the equipment. Visually inspect the package contents for any evidence of
shipping damage. Retain all shipping containers and packaging material in case reshipment is
necessary.
PACKAGE CONTENTS
As shipped from the Garmin AT factory, the Apollo GX50/60/65 package includes most items
necessary for installation other than supplies normally available at the installation shop, such as
wire and cable ties, and required input and output equipment. The standard items included in the
package are listed in Table 1.