Filter
Top Products
54
GETTING START-
ED
Using the GOTO
Key
Mark Key (con’t.)
The mark key can also be used on the Map Page to mark the cursor position or
an on-screen navaid. To mark a navaid, select it with the cursor. The sounder will
use the navaid text shown on the cartography as the default comment.
To mark the cursor or navaid position with the
M
key:
1. Use the
R
keypad to move the cursor to the desired position or navaid.
2. Press the
M
key.
3. Highlight the ‘Use Map Posn?’ or the ‘Use NAVAID Posn?’ option and press
T
.
4. To accept the waypoint with the default name, symbol and comment (the depth at that
position), press
T
.
5. To enter a different name, symbol or comment, highlight the appropriate field and press
the
T
key.
6. After entering and confirming your changes, move the field highlight back to the ‘Done?’
prompt and press
T
.
SECTION
7
WAYPOINTS
Using the MARK Key
A
B
A. To create a waypoint at an on-screen navaid, move
the cursor over the desired navaid.
B. Press the MARK key and select the ‘Use Navaid
Posn?’ option. Press EDIT/ENTER to finish.
19000138.10A.QXD 11/11/99 8:47 AM Page 54