Filter
Top Products
38
GETTING START-
ED
Using the GOTO
Key
Sounder Setup Page (con’t.)
To use manual calibration:
1. Ensure manual calibration mode is selected in the speed calibration field. If not,
press
O
, highlight ‘Manual Calibrate?’, and press
O
.
2. Press
T
. The slider bar will turn black and the calibration range bar will turn
white.
3. Use the
R
keypad to move the selector bar until the speed displayed in the ‘STW’
field matches the speed of your boat. Move the bar to the left for negative values
and right for positive values.
4. When the desired speed is displayed, press
T
.
5. Press
Q
to return to the Sounder Page.
Two options can be accessed from the sounder setup options menu: ‘Manual or
Auto Calibration’ (whichever one currently is not selected) and ‘Restore Defaults.’
Access the options menu by pressing
O
, select an option, and press
T
.
• Setup Simulator: The setup simulator option will appear only when the unit is in
simulator mode. It allows you to define simulator speed, course, altitude, depth, and
position values. See the getting started tour for more details on using the simulator.
SECTION
3
SOUNDER PAGE
Speed Calibration and
Simulator Setup
A
B
A. The ‘Setup Simulator?’ option is included in the
options menu for each of the five main pages
when in simulator mode.
B. Each simulator data field may be modified to
display user-selected values and navigational
information.
19000138.10A.QXD 11/11/99 8:47 AM Page 38