Garmin 76CS GPS Receiver User Manual


 
69
GPSmap 76CS
GPS Navigation
Welcome Page Setup
Welcome Page Setup
The Welcome Page Setup Page allows you to insert a message such as
ownership information on the Welcome Page (the first page to display
when you turn the unit on).
To setup the Welcome Page:
1. Access the Welcome Page Setup Page as explained at the
beginning of this section.
2. Use the keypad at the base of the screen to enter your welcome
message. Use the ROCKER key to select text and press ENTER.
3. When completed, highlight “OK” on the keypad and press
ENTER to close or... press and hold the PAGE key.
4. Turn you unit Off and then On again to view your Welcome
Page message. You may edit the message as desired by follow-
ing steps 1 through 3 again.
Text and
Number
Keypad
Placing your name and phone number on this page
may aid in recovery of your unit should it become lost
or stolen.
Use the elevation deter-
mined by the GPS receiver
Calibration Complete
Press ENTER
Calibration Failed
Press ENTER and retry
Altimeter Setup
Allow the GPS Receiver to deter
mine the elevation: the GPS receiver
estimates the current elevation when
determining its location. The accur
racy will vary depending on the posi
tion (telemetry) of satellites overhead.
It won’t be as accurate as an elevation
entered from a known source, but is
suffi cient for most navigation applica
tions.
2. When fi nished, a Completed or Failed
message will display.
GPSmap 76CS Owner's Guide copy.indd 69GPSmap 76CS Owner's Guide copy.indd 69 10/8/2004 8:28:28 AM10/8/2004 8:28:28 AM