Garmin GPSMAP 168 GPS Receiver User Manual


 
62
Reference
Editing Routes
The GPSMAP 168 Sounder’s Route Edit mode also allows you to insert a new route waypoint in
any route leg using the map cursor.
To insert a new point between two existing route waypoints:
1. Use the ARROW KEYPAD to select the leg you want to insert the new waypoint in (the route line
will highlight and change to a dotted line when the leg is selected) and press ENTER/MARK.
2. Move the cursor to the new map position, existing waypoint, or map item (You will see ’INS’ below
the arrow and the route lines will move with the arrow.) and press ENTER/MARK.
3. If you are not inserting an existing point, press ENTER/MARK to confi rm the new waypoint.
Insert/Add Waypoint— Allow you to insert a waypoint into the list of route points or add a point(s)
onto the end of the route.
To insert a point into the route or add a point to the end:
1. From either the Route Review or Active Route Pages, use the ARROW KEYPAD to highlight the
point you wish to insert the new point before (To add a point to the end, highlight the blank fi eld at
the bottom of the list) and press MENU.
2. Highlight ‘Insert Waypoint’ or ‘Add Waypoint’ and press ENTER/MARK.
3. From either the ‘By Name’ or ‘Nearest’ tab lists, highlight the waypoint to be inserted/added and
press ENTER/MARK.
To select a waypoint from the map, highlight the ‘By Name’ or ‘Nearest’ tab and press MENU. With
‘Select From Map’ highlighted, press ENTER/MARK. Use the zoom IN and OUT buttons and the
ARROW KEYPAD to highlight a waypoint on the map and press ENTER/MARK.
Remove Waypoint— Allows you to remove a point (waypoint or map item) from a route. This option
is available from both the Route Review and Active Route Pages.
To remove a point from a route:
1. From either the Route Review or Active Route Pages, use the ARROW KEYPAD to highlight the
point to remove and press MENU.
2. Highlight ‘Remove Waypoint’ and press ENTER/MARK.
Highlight the route leg on which you
wish to insert a waypoint and press
ENTER/MARK.
Drag the route leg to an existing waypoint
(shown), map item, or a blank spot on the
map to create a new route point.
168 Manual Part 2.indd 01/09/01, 9:43 AM62