Filter
Top Products
40
Reference
System Setup
System Setup Pages
The System Setup Pages can be accessed by pressing the MENU key twice from any page to display
the Main Menu. Select System Setup and press ENTER. This group of pages is used to perform various
System Setup functions. Each selectable page is denoted by a ‘fi le tab’ at the top that identifi es the
function of that page.
To select a System Setup option:
1. With the System Setup on the screen, select the fi le tab for the desired function. The associated
information and options are automatically displayed when the fi le tab is selected.
2. Once the desired fi le tab has been selected use the DOWN key to select the desired option
to view or modify.
3. Press ENTER to change to a different option. In most cases, a list of available options is shown.
4. Use the ROCKER KEYPAD to select the desired choice, then press ENTER again to accept
the change.
5. Use the UP key to return to the fi le tab area and select another fi le tab, if desired.
At some time, you may desire to change part of the System Setup back to the way it was the fi rst
time you used your StreetPilot III. This can be done by selecting the option called Restore Original
Settings.
To restore the original settings:
1. Use the ROCKER keypad to move the cursor to the fi le tab for which you want to restore the
original settings.
2. Press the MENU key. A window is displayed with Restore Original Settings selected.
3. Press ENTER. Only the settings for that fi le tab are modifi ed.
4. If desired, repeat steps 1 through 3 for other fi le tabs.
The System Setup Pages allows you to customize the
features of the StreetPilot III.
You can completely reset the system setup features to
their original settings.
OM REV B.indd 6/28/01, 9:43 AM40