Garmin 2820 GPS Receiver User Manual


 
40 StreetPilot 2820 Owner’s Manual
CUSTOMIZING THE STREETPILOT 2820
Keypress Tone—turn on or off the tone that sounds each time you
press a key on the remote.
Speed Adjusted Volume
—select how much the volume increases
as your speed increases. Low increases your volume slightly; High
increases your volume the most. This is helpful when you are
driving on the highway and the ambient noise level increases (from
wind or other factors).
Audio Jack—select the type of audio output to be used, such as
Headphones.
Adjusting the Proximity (Custom POI) Alerts
From the Menu page, touch Settings > General > Proximity
Alerts. This adjusts the visual and audio notifications for
custom POIs you have loaded on the StreetPilot 2820 For more
information about loading custom POIs, see page 49.
Audio Notifications—turn off or on the alerts that sound as you
approach a custom POI.
Visual Notification—turn off or on the pop-up alerts that appear as
you approach a custom POI.
Continuous Notification
—select which alerts (which types of
POIs) you will be continually notified about.
Changing the TourGuide Settings
From the Menu page, touch Settings > General > TourGuide.
If you have a third-party, GPS-guided audio tour loaded on your
StreetPilot, you can select Auto Play to hear the complete tour as
programmed, Prompted to show the speaker icon on the map
when tour information is available during your route, or Off. For
more information about the TourGuide feature, see page 49. For
more information about loading files to your StreetPilot,
see page 22.
Changing the Time Settings
From the Menu page, touch Settings > General > Time.
Time Zone—select your time zone or a nearby city. Touch
Custom
to set the time manually. Touch OK after you adjust the time.
Touch
List Time Zones to return to the time zone/city list.
Time Format
—select 12 or 24-hour time format.
Daylight Saving—select Auto, Yes, or No. The Auto setting
automatically adjusts the time for daylight saving time based on
your time zone.