Garmin 2820 GPS Receiver User Manual


 
38 StreetPilot 2820 Owner’s Manual
CUSTOMIZING THE STREETPILOT 2820
Adjusting the Volume
From the Menu page, touch Volume or simply press and hold
the SPEAK key. Touch and to adjust the volume of the
speaker.
Touch
Mute, or press and hold the SPEAK key, to mute and
unmute the StreetPilot 2820.
Touch
Settings to open the Audio Settings; see page 39.
Touch
Advanced to adjust the volume levels for the voice prompts
in relation to the other audio output.
Customizing the General Settings
From the Menu page, touch Settings > General.
Changing the GPS Settings
From the Menu page, touch Settings > General > GPS, or touch
the GPS Settings button on the GPS Info page.
Use Indoors—touch Yes to turn the GPS receiver off and use the
unit indoors.
Set Position—if Use Indoors is selected, you can select a location
on the map as your current location (position). Touch OK after you
select your location.
WAAS/
EGNOS—disable and enable WAAS/EGNOS. Wide Area
Augmentation System (WAAS) and Euro Geostationary Navigation
Overlay Service (EGNOS) are systems of satellites and ground
stations that provide GPS signal corrections, giving you even better
position accuracy. To learn about WAAS and EGNOS, visit
www.garmin.com/aboutGPS/waas.html.
CUSTOMIZING THE STREETPILOT 2820