Filter
Top Products
1. OPERATIONAL OVERVIEW
1-41
1.21.5 Saving screen shot
You may take a screen shot to save the current window. Compared to raw data, the size of
the screen shot is small, thus loading time is much shorter.
1. Connect a USB hard disk to the USB on the processor unit.
2. Click File.
3. Click Save the screen shot.
The screen shot is saved to the location designated at step 5 in paragraph 1.21.1. This
data is automatically assigned a file name and extension as below.
05_50_32.jpg
Extension
Seconds
Minutes
Hours
File name for screen shot