Filter
Top Products
1. OPERATIONAL OVERVIEW
1-6
1.3 Turning the Power On/Off
Turning on the power
1. Turn on the monitor.
2. Open the power switch cover on the Control Unit and push the
switch. The power
comes on, Windows
®
* starts up, the FCV30 application launches and then the last-used
display appears.
Windows is the registered trademark of Microsoft, Inc.
Note that the Windows
®
Help feature is not available with this equipment.
Turning off the power
There are two methods to turn off the power.
a) Press the
switch. Do not press the switch more than four seconds; last-used
settings will not be memorized.
b) Click the close button (
). The following window appears. Then, click the Yes button to
quit.
Are you sure to quit?
[Yes]-> Shutdown
[No ]-> Cancel
Yes No
Confirmation
Shutdown confirmation window
Note: Power is automatically turned off anytime the processor unit is disconnected from the
control unit.