Filter
Top Products
HowtousePreferences
14
There are 9 user-selectable Preferences
so you can customize your 9500i for
your specific driving needs. The buttons
labeled “MRK” and “BRT” are also used to
enter Preferences, REVIEW your current
settings, and to CHANGE any settings as
desired. The word PREF is located on the
top of the detector, and is highlighted in
colored graphics. Pages 16-18 explain each
option in more detail.
How to use Preferences
To enter Preferences, press and hold
the “MRK” and “BRT” buttons down for 2
seconds. (The unit will beep twice, and will
display the word
EgZ[h.)
Then press the “BRT” button to review
the current settings. (You can either tap
the button to change from item to item, or
hold the button to scroll through the items).
Press the “MRK” button to change any
setting. (You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
To exit Preferences, simply wait 8
seconds without pressing any button, or
press the power button (
). The unit will
display
8dbeaZiZ, beep 4 times, and
return to normal operation.
1
2
3
4
An example
Here is how you would turn PASSPORT’s
AutoMute feature o.
1 Enter Preferences by holding both the
MRK and BRT buttons down for 2 seconds.
PASSPORT will beep twice and display
EgZ[h.
2 Then hold the “BRT” button down.
PASSPORT will scroll through the catego-
ries, starting with Pilot Light (
E^adi), then
SpeedAlert (
h6agi), Power-on sequence
(
ElgDc), then Signal strength meter
(
BZiZg), and then AutoMute (VBjiZ).
3 Release the “MRK” button when
PASSPORT shows the AutoMute item. Since
the factory setting is for AutoMute to be on,
PASSPORT will display
VBjiZDC.
(If you accidentally don’t release the
“MRK” button in time, and PASSPORT goes
to the next category, simply hold the “MRK”
button down again, and after PASSPORT
scrolls through all categories, it will begin
again at the top of the list.)
4 Press the MRK button to change from
VBjiZDC to VBjiZD;;.
5 To complete choosing your Preferences,
simply wait 8 seconds without pressing any
buttons, or press the power button (
).
PASSPORT will display
8dbeaZiZ, beep 4
times, and return to normal operation.