Filter
Top Products
Instruction Manual MM850481 ed.01
The “S” symbol below the first digit is the cursor.
You can move the cursor between the digit using the [W] and [X] keys.
You can change the selected digit using [S] and [T]. If “9” or “0” values are exceeded, the left digit is increased or
decrease.
Press [ENTER] to memory store the value and return to the previous page.
Press [ESCAPE] (F1) to return to the previous page without save the changes.
7.1.4 Text input
If you have to set a text parameter (e.g. customer name, etc.) use the following procedure:
Select the parameter to be changed (e.g. customer name) with the [S] and [T] key from the configuring menu.
Press [ENTER] to enter in modify page as follows:
!"#$%&'()
*+,-./
0123
456789:;<=>?@ABCDEFG
HIJKLMNOPQRSTUVWXYZ
CONFIRM
ESCAPE
–
C
A “S” symbol below the “ “ (blank) character in figure, represent the cursor. It is used to identify the selected character;
you can move it using the [W], [X], [S] and [T] keys. The box below the characters table shows the currently inserted
text. The symbol “W” is the end of line symbol.
Press [CONFIRM] to write in the line box the selected char. The reversed char “C”, when selected, delete the last
inserted char.
Press [ENTER] to memory store the text and return to the previous page.
Press [ESCAPE] to return to the previous page without save the changes.
7.1.5 Select by a list
If you have to set a text parameter (e.g. Tag name, fuel type, etc.) use the following procedure:
Select the parameter to be changed (e.g. fuel type) with the [S] and [T] key from the configuring menu.
Press [ENTER] to enter in modify page as follows:
-- Fuel --
Natural Gas
LPG
Gasoil
Combustible oil
ESCAPE
–
The “X” symbol on the left is the cursor.
You can move the cursor between the digit using the [S] and [T] keys.
Press [ENTER] to memory store the selection and return to the previous page.
Press [ESCAPE] (F1) to return to the previous page without save the changes.
20