Filter
Top Products
Instruction Manual MM850481 ed.01
O2
:
20
.
9
% SO2
:
1000
CO : 2000ppm CxHy: 5.00
Ta : 20 °C Lam : 0.99
Tg : 400 °C NO2 : 100
η : 95.7 % CO2 : 10.2
NOx: 500ppm Per : 10.5
R
e
f
O
2
GRAPH
–
Function box
Status barMenu&Measure area
The Menu and Measure area displays the analysis data, the menu and all messages for the operator. The measured and
calculated parameters are displayed in different pages of 6 parameters each.
Using the [S] and [T] keys you can change page, changing the displayed parameters.
Pressing the [W] and [X] keys it is possible to increase or decrease the number of the displayed parameters (ZOOM
function).
O2 20.9%
CO 2000ppm
Ta 20.0°C
R
e
f
O2
GRAPH
–
O2
:
20
.
9
%
CO : 2000 ppm
Tamb : 20 °C
Tgas : 400 °C
Eff : 95.7 %
NOx : 500 ppm
R
e
f
O2
–
GRAPH
O2
:
20
.
9% SO2
:
1000
p
CO : 2000p CxHy: 5.00
Ta : 20.2°C Lam : 0.99
Tg : 400.3°C NO2 : 100p
η
: 95.7% CO2 : 10.2p
NOx: 500p Per : 10.5
R
e
f
O2
–
GRAPH
Two boxes are positioned on the bottom of the display. They contains the name of the function assigned to the [F1] and
[F2] function keys.
The status bar uses graphical symbols to describe the actual operation mode of the instrument.
– / ≠
Battery status: ≠=charged, –=discharged
Max/Min/
Med/Mem
The Max, Med, Min, Actual values are displayed in memory recalling mode.
O
2
The displayed measure are referred to oxygen
Memory Card (PCMCIA) inserted.
Line operations
7.1.3 Display adjustment
In autozero procedure, you can press the [W] and [X] keys to adjust the LCD contrast.
When the instrument is in measuring mode you should press the [HELP] key and press the [W] and [X] keys to adjust
the LCD contrast.
7.1.4 Numerical input
If you have to set a numerical parameter (e.g. O
2
reference, etc.) use the following procedure:
Select the parameter to be changed (e.g. O
2
reference) with the [S] and [T] key from the configuring menu.
Press [ENTER] to enter in modify page as follows:
CO Reference
0.0
ESCAPE
–
19