Filter
Top Products
46
glossary of terms
507M Tilt sensor:
This sensor detects when the vehicle is being raised in
an attempt to either remove the wheels/tires or tow the vehicle. This
sensor is capable of learning the vehicle’s initial inclination angles each
time the vehicle is parked.
Control Unit:
The "brain" of your system. Usually hidden underneath
the dash area of the vehicle. It houses the microprocessor which mon-
itors your vehicle and controls all of the system's functions.
Input
: A physical connection to the system. An input can be provided
by a sensor, pinswitch or through an existing system in the vehicle, such
as ignition or courtesy lights.
LED
: Blue light mounted somewhere in the vehicle. It is used to indi-
cate the status of your system. It is also used to report triggers and
faults in the system or sensors.
Omnisensor: A dual-zone learning impact sensor.
PlainView 2 Valet Switch
: A small two-button switch mounted some-
where inside the vehicle. It is used to override the alarm when a trans-
mitter is lost or damaged, or to enter or exit Valet mode.
Power Window Control:
Automatic power window control is provided
with the SmartWindows system.