Filter
Top Products
36
low temperature/battery start
Your remote start system can automatically start your vehicle if the inte-
rior reaches a pre-programmed low temperature setting or if the bat-
tery charge level drops too low. Both these settings can be calibrated
and set using the Cliffnet Wizard. It is recommended that you have
your installer calibrate and set the start time intervals if you intend to
use this feature.
To activate autostart mode:
z
Arm the security section of your system.
z
Transmit the Autostart command, the button twice,
then the button once. The lights will flash 2 times as
confirmation of Autostart mode.
z
The remote start will monitor the temperature and battery
levels and start at the programmed settings and intervals.
retained accessory power
The remote start section of this system will, after turning off the igni-
tion, keep the accessory power of the vehicle on for 5 minutes or until
the vehicle door is opened. This is very convenient if you forgot to roll
up windows or just want to listen to the radio.