Filter
Top Products
42
Read the following instructions thoroughly for a full understanding of
how to properly adjust this sensor.
1. Disarm system
2. Transmit Channel 16 (Press 3-times then 1-
time)
z
The LED will turn on and the siren will chirp 1-time.
z
Primary (full trigger) zone adjustment has now been
entered.
z
Primary zone can now be adjusted.
3. Adjusting Primary Zone
z
Press of the remote control to increase sensitivity.
z
Press of the remote control to decrease sensitivity.
z
The sensor Primary zone can be tested at any time dur-
ing adjustment and will generate 1 siren chirp each
time the zone is activated.
4. Press to adjust Warn-Away zone
z
Siren chirps 1 time.
z
Warn-away Zone adjustment has now been entered.
z
Warn-away Zone can now be adjusted.
5. Adjust Warn-away Zone
z
Press to increase sensitivity.
z
Press to decrease sensitivity.
z
The sensor Warn-away zone can be tested at any time
during adjustment and will generate 1 siren chirp each
time the zone is activated.